Yamaha RX-V671 7.1-Channel Network AV Receiver

Yamaha RX-V671 7.1-Channel Network AV Receiver Review

Yamaha RX-V671 7.1-Channel Network AV Receiver Feature

• SIRIUS Satellite Radio ready
• Front panel USB Digital Connection for iPod and iPhone
• HDMI front panel input for devices such as camcorders and digital cameras
• Audio input assign capability for HDMI and component video input
• Ability to change HDMI Input while in Standby Through mode

Network AV Receiver with 6 in / 1 out HDMI ( 3D and ARC compatibility), iPhone/Android app compatibility, front panel HDMI and USB connections, HD Audio decoding with CINEMA DSP 3D, and 1080p upscaling. SIRIUS Satellite Radio ready. Front panel USB Digital Connection for iPod and iPhone. HDMI front panel input for devices such as camcorders and digital cameras. Audio input assign capability for HDMI and component video input. Ability to change HDMI Input while in Standby Through mode. 1080p-compatible HDMI: 6 inputs (1 on front) and 1 output. 2 - Zone,iPhone/Android app compatibility. Analog and HDMI video upscaling to full 1080p. HDMI and USM front panel connection. Network Receiver. iPhone/Android app compatibility.

Lepai Digital 2x15W Mini Amplifier with Remote USB MP3 SD FM

Lepai Digital 2x15W Mini Amplifier with Remote USB MP3 SD FM Review

Lepai Digital 2x15W Mini Amplifier with Remote USB MP3 SD FM Feature

• All-in-one amplifier with SD/MMC card and USB input
• Up to 2 x 15W of output
• Power supply, IR remote, and FM antenna included
• 4-ohm stable
• 12 VDC, 2A power supply included

Up to 15 watts of stereo power are on tap with the Lepai LP-A68. Additionally you will find included features such as: built-in FM tuner with collapsible antenna, MP3 decoding with USB and SD/MMC input, IR remote control, four EQ functions, and tone controls. Power supply included.

Pyle Home PT530A Two Channel 350 Watts Built-In AM/FM Radio Amplifier Receiver

Pyle Home PT530A Two Channel 350 Watts Built-In AM/FM Radio Amplifier Receiver Review

Pyle Home PT530A Two Channel 350 Watts Built-In AM/FM Radio Amplifier Receiver Feature

• 2 Channel Amplifier - Full Remote Control - Dimensions: 19.7'' x 15.7'' x 7.7''
• Built-In AM/FM Radio - VFD Display
• 2 MIC Input, Treble and Bass of MIC Adjustable, Independent MIC Volume Control - Power Output: 350W for L, R Channel (4 Ohms)
• Over Current Protection, Short Circuit Protection And Over Voltage Protection - Input Selector: 3 Stereo RCA Selector, 1AM/FM Radio, 2 Microphone Input
• 12 Preset Radio Station - Output: 2 Channel Speaker Output Terminal for L, R

The PT530A is a home stereo receiver with built-in AM/FM radio, two ¼" mic inputs, and 350 watts of output power. Store up to 12 presets. Adjust the mic volume control, treble, and bass. Inputs for 3 stereo RCA appliances. 2 channel speaker output. VFD display shows station frequency. Short circuit and over voltage protection keeps your equipment secure.

Yamaha HTR-3063BL 5.1 Channel 500 Watt AV Receiver (Each, Black)

Yamaha HTR-3063BL 5.1 Channel 500 Watt AV Receiver (Each, Black) Review

Yamaha HTR-3063BL 5.1 Channel 500 Watt AV Receiver (Each, Black) Feature

• 5-channel 500W powerful surround sound (100W x 5)
• iPod/iPhone compatibility with optional YDS-12 Universal Dock
• Bluetooth (A2DP) compatibility with optional Yamaha Bluetooth® Wireless Audio Receiver YBA-10
• 1080p-compatible HDMI repeater with 3D (4 in/1 out)
• SCENE buttons with direct power on (BD/DVD, TV, CD and Radio) ? quick and simple to use

Yamaha HTR-3063BL5.1 Channel 500 Watt AV Receiver is a great value-priced receiver to help take your home theater experience further. It features the latest HDMI specifications (4 inputs/1 output) with 3D-readiness (with firmware upgrade), 1080p HDMI repeating, and renowned Yamaha technologies like SCENE and CINEMA DSP. Expand your options even further with optional docks (sold separately) to add your iPod, iPhone, or Bluetooth sources.

Pioneer DEH-1300MP CD Receiver with MP3/WMA Playback and Remote Control

Pioneer DEH-1300MP CD Receiver with MP3/WMA Playback and Remote Control Review

Pioneer DEH-1300MP CD Receiver with MP3/WMA Playback and Remote Control Feature

• Single-DIN AM/FM radio, CD, CD-R/RW, MP3/WMA receiver
• 4 x 50 Watts maximum power with two-channel 2V preamp outputs
• One-line, eight-character white LCD display with with black background
• Includes front panel auxiliary input
• One-year limited warranty

The DEH-1300MP combines Pioneer's legendary in-car audio technologies with the simplicity of modern design to provide a boost to your vehicle's existing sound system. Built for those seeking exceptional performance at an unprecedented value, the DEH-1300MP provides access to all your favorite music through its multi-format CD player, universal connectivity to portable media players and enhanced AM/FM reception.

Pioneer's legendary in-car audio technologies with the simplicity of modern design. Click here for a larger image

Built for the Digital Age

On top of playing traditional audio CD's, the DEH-1300MP also reads and plays MP3 and WMA file formats. This means your can pack more music onto a single disc for extended playback on those long road trips. The DEH-1300MP also features Pioneer's very own Advanced Sound Retriever, a technology that digitally enhances compressed audio such as MP3 for a rich, full, dynamic sound quality to your music collection.

Front-panel auxiliary input for connecting external audio devices.

Full-function remote is included.

Jack of All Trades

The DEH-1300MP features a universal 3.5mm mini-jack auxiliary input to allow playback from your favorite portable media player. This simple plug and play audio connection provides a level of sound quality that leaves FM transmitters and cassette adapters in the dust.

Tune In. Turn It Up.

The DEH-1300MP incorporates one of the most advanced AM/FM tuners ever built, the Supertuner IIID. Combining the best of digital and analog tuner technologies, Supertuner IIID reduces distortion to deliver exceptional FM and AM band performance. Whether you're driving the open road where radio signals can be weak, or maneuvering the dense urban environment, Supertuner IIID faithfully delivers your favorite stations with brilliant clarity.

A Musical Powerhouse

Compared to conventional amplifier ICs commonly used in car headunits, the DEH-1300MP's MOSFET amplifier circuit provides higher power with minimal distortion and practically zero device switching noise. This means that your music sounds clear and solid when played at higher volumes. With the DEH-1300MP's RCA pre-outs, you can easily attach an amplifier to your system to drive speakers or a subwoofer.

Get Right to Your Music

A sleek design, intuitive interface, and large LCD display means that you'll spend less time searching through menus, and more time listening to the music you love. You can also control your tunes from a distance with DEH-1300MP's included remote control.

What's in the Box

Pioneer DEH-1300MP Receiver, Sleeve/Trim Ring, Wiring Harness, Remote Control, Installation Hardware, Owner's Manual, Warranty Card

Pioneer DEH-1300MP CD Receiver with MP3/WMA Playback and Remote Control. Includes Supertuner IIID for superior AM and FM, MOSFET 50W x 4 for better sound and Front AUX input for portable devices.

Yamaha RX-V471BL 5.1-Channel AV Receiver

Yamaha RX-V471BL 5.1-Channel AV Receiver Review

Yamaha RX-V471BL 5.1-Channel AV Receiver Feature

• USB Digital Connection for iPod and iPhone on the front panel
• 1080p compatible HDMI with 3D and Audio Return Channel
• YPAO sound optimization for automatic speaker setup
• Turn on volume setting and Maximum Volume Settings
• Compressed Music Enhancer with CINENA DSP for full rich sound from all sources

USB Digital Connection for iPod and iPhone on the front panel. 1080p compatible HDMI with 3D and Audio Return Channel. YPAO sound optimization for automatic speaker setup. Turn on volume setting and Maximum Volume Settings. Compressed Music Enhancer with CINENA DSP for full rich sound from all sources.

Sony STR-DG520 5.1 Audio Video Receiver - Black

Sony STR-DG520 5.1 Audio Video Receiver - Black Review

Sony STR-DG520 5.1 Audio Video Receiver - Black Feature

• 5.1 Channel Audio/Video Receiver
• 100 Watts X 5 Power (8 Ohms, 20Hz-20Khz,.09% Thd)
• 1080P Hdmi Pass Through (2 In / 1 Out)
• Accepts 1080/60P And 24P Video Signal Via Hdmi
• Digital Media Port

90 watts x 5 into 8 ohms (20-20,000 Hz) at 0.09% THD. Dolby® Digital, DTS®, and Dolby Pro Logic® II processing. Digital Cinema Sound modes. Digital Media Port for adding an optional Sony iPod dock or wireless PC music player. HDMI digital video switching (2 in, 1 out) -- pass-through only (a separate cable connection is required for audio).

Onkyo M-282 2-Channel Power Amplifier

Onkyo M-282 2-Channel Power Amplifier Review

Onkyo M-282 2-Channel Power Amplifier Feature

• 100 Watts per Channel Minimum into 8 Ohms, 2 Channels Driven, FTC
• Auto power on/off
• High current, low impedance drive
• Preamp-level input-output loop
• 12volt trigger and input level adjustment

Ideal for quality stereo listening, for expanding your surround system from 5.1 to 6.1 or 7.1 channels to deliver the latest home theater surround formats, and for multiroom setups, Onkyo's M-282 stereo power amplifier makes a powerful and affordable system upgrade. The amp uses Onkyo's exclusive Wide Range Amplifier Technology and pumps 2 x 100 watts per channel RMS into 8 ohm speakers and 2 x 125 wpc into 6 ohms. (For dynamic power handling, you're looking at 2 x 140 watts into 8 ohms, 2 x 125 watts into 6 ohms.)

If you're going for an upgrade from 5.1 to 7.1, make sure your 5.1 surround receiver has preamplifier outputs for 7.1 channels. The M-282 only amplifies a line-level signal; it does not include surround processing or a volume control like a traditional preamplifier or an integrated amplifier/surround receiver.

You can rig the amp to power up when it senses an audio signal or through the use of a 12-volt trigger (standard to automation systems). The receiver also features audio passthrough jacks in case you want to daisy-chain several like components through several rooms for multi-room distribution of your primary listening source.

The receiver uses Onkyo's Wide Range Amplifier Technology (WRAT), which ensures signal accuracy even with high-resolution sources such as DVD-Audio and SACD. According to Onkyo, WRAT eliminates the adverse effects of counter-electromotive force by applying an unusually low amount of NFB (negative feedback), constructing the amp with carefully selected, high-tolerance, wide-range parts in all critical sections, and using innovative circuit topology based on the company's decades of experience building high-end amplifiers. The result? A flat response beyond 100 kHz.

Rear-panel connections and controls consist of a ground (use only if the system exhibits an audible hum), an input-level adjustment, 1 each stereo analog (left/right) RCA audio input and passthrough/output, a trigger setting (audio, 12-volt, off), a 12-volt trigger input jack, left/right speaker outputs with banana-plug-friendly binding-post speaker terminals, and a grounded AC power terminal.

What's in the Box
Power amplifier, an AC power cord, and a user's manual. Ideal for quality stereo listening, for expanding your surround system from 5.1 to 6.1 or 7.1 channels to deliver the latest home theater surround formats, and for multiroom setups, Onkyo's M-282 stereo power amplifier makes a powerful and affordable system upgrade. The amp uses Onkyo's exclusive Wide Range Amplifier Technology and pumps 2 x 100 watts per channel RMS into 8 ohm speakers and 2 x 125 wpc into 6 ohms. (For dynamic power handling, you're looking at 2 x 140 watts into 8 ohms, 2 x 125 watts into 6 ohms.) If you're going for an upgrade from 5.1 to 7.1, make sure your 5.1 surround receiver has preamplifier outputs for 7.1 channels. The M-282 only amplifies a line-level signal; it does not include surround processing or a volume control like a traditional preamplifier or an integrated amplifier/surround receiver. You can rig the amp to power up when it senses an audio signal or through the use of a 12-volt trigger (standard to automation systems). The receiver also features audio passthrough jacks in case you want to daisy-chain several like components through several rooms for multi-room distribution of your primary listening source. The receiver uses Onkyo's Wide Range Amplifier Technology (WRAT), which ensures signal accuracy even with high-resolution sources such as DVD-Audio and SACD. According to Onkyo, WRAT eliminates the adverse effects of counter-electromotive force by applying an unusually low amount of NFB (negative feedback), constructing the amp with carefully selected, high-tolerance, wide-range parts in all critical sections, and using innovative circuit topology based on the company's decades of experience building high-end amplifiers. The result? A flat response beyond 100 kHz. Rear-panel connections and controls consist of a ground (use only if the system exhibits an audible hum), an input-level adjustment, 1 each stereo analog (left/right) RCA audio input and passthrough/output, a trigger setting (audio, 12-volt, off), a 12-volt trigger input jack, left/right speaker outputs with banana-plug-friendly binding-post speaker terminals, and a grounded AC power terminal. What's in the Box - Power amplifier, an AC power cord, and a user's manual.

Harman Kardon HK 3490 120 Watt Stereo Receiver

Harman Kardon HK 3490 120 Watt Stereo Receiver Review

Harman Kardon HK 3490 120 Watt Stereo Receiver Feature

• Affordable stereo receiver with Remote A/B switching
• Compatible with the Bridge II docking station for iPod playback, control, and charging
• Dolby Headphone and Dolby Virtual Speaker surround modes
• Dual subwoofer output, with trigger for direct connection to powered subwoofers
• XM Tuner Ready

In the years since Harman Kardon invented the high-fidelity receiver, we have taken to heart the philosophy of bringing the joy of home entertainment to as many people as possible, all the while improving performance and adding features. The HK 3490 offers the best in traditional analog two-channel audio, including a 30-preset AM/FM tuner, an integrated phono preamplifier and a tape monitor loop that lets you listen to your tape recordings as they’re being made, while adding digital audio inputs, an XM Ready tuner and a connection for The Bridge II docking station, which delivers audio playback and control for iPod, iPod touch and iPhone models (not included). If high-performance audio reproduction weren’t enough, we’ve added composite video switching. Use the included audio/video cable to connect your iPod or other portable player to the HK 3490, or just enjoy your favorite television programs in stereo without firing up your main home theater. Whether listening to an LP record pressed in the last century or watching a movie you downloaded to your digital media player last night, your new HK 3490 delivers the powerful, detailed performance you’ve come to expect from Harman Kardon.

Pyle Home PT990A 1000 Watt AM/FM Multi Source Digital Receiver with Vacuum Tube Preamplifier (USB/MP3 Inputs, Remote Supports iPod Control)

Pyle Home PT990A 1000 Watt AM/FM Multi Source Digital Receiver with Vacuum Tube Preamplifier (USB/MP3 Inputs, Remote Supports iPod Control) Review

Pyle Home PT990A 1000 Watt AM/FM Multi Source Digital Receiver with Vacuum Tube Preamplifier (USB/MP3 Inputs, Remote Supports iPod Control) Feature

• 300W x 2 Channels RMS; USB-input with MP3 playback support; Analog inputs: Phono, Tape, DAB,,MD DVD, CD, 2 x AUX
• Digital inputs: 2 x Coaxial, 2 x Optical; Frequency Response: 20Hz-60kHz; Audio Analogue input Senstivity / Impedance: 200mV / 47 Kohm
• Wide Dynamic Range high Voltage Vacuum Tube Preamplifier Aluminum Panel; Bass / Treble +/- 10dB Tone Control; Analog audio outputs: Tape L/R(REC)out
• Digital audio inputs: Coaxial in x2 / Optical in x2 / (PCM only); Remote control iPod function; Power supply voltage: 110V~60Hz
• Tuning Range: FM 87.5 MHz-108MHz,AM 522 kHz-1629 kHz/AM 530 kHz-1710 kHz; USB multimedia player for audio
• Dimensions: 17.09''(W) × 12.48''(D) × 5.28''(H)

The Pyle PT990A features 2 Real Preamp Tubes, giving it a presence and power usually reserved for expensive high end professional equipment. It also features an integrated iPod system, allowing you to control all of your iPod functions wirelessly with the included remote control. The PT990A has four digital inputs, two coax and two toslink, along with a variety of analog inputs. USB memory sticks are also supported, with a convenient dock on the front of the receiver. PT990A produces a surprising amount of clear, undistorted power, and features a gorgeous anodized aluminum front panel, along with a motorized aluminum volume control knob that has been beautifully silk screened with roman numerals. Pyle has been in business for over 35 years, and their manufacturing experience and expertise is easy to see - and hear.

Pyle Home PCA2 80-Watt Stereo Mini Power Amplifier

Pyle Home PCA2 80-Watt Stereo Mini Power Amplifier Review

Pyle Home PCA2 80-Watt Stereo Mini Power Amplifier Feature

• Compatible with any audio/computer device
• POWER ON/OFF switch and LED indicator
• Connect to MP3 sources via 3.5mm to RCA converter
• 110/220V input voltage selector
• Push-type speaker outputs with bass and treble controls
• 2x8W 1% THD and 2x40W MAX. - Compatible With Any Audio/Computerize Devices
• MASTER volume control - RCA jack input
• POWER ON/OFF switch and LED indicator - (MP3)Via 3.5mm To RCA Converter
• PUSH TYPE speaker output - Dimensions: 6.3''W x 2..72''H x 4.72''D
• TREBLE and BASS controls - 110/220 VOLTAGE selector

The PCA2 mini stereo power amplifier from Pyle provides up to 40W of power on each channel at 4 Ohms. Connect your inputs using the RCA jacks, and output an amplified audio signal over standard speaker push jacks. It’s compatible with any audio or computer device--you can even hook up an iPod using a 3.5mm to RCA jack converter. A master volume control on the front lets you adjust the gain, and treble, bass, and volume controls on the front let you tweak your sound to exactly how you want it. The PCA2 runs on 110V or 220V with a voltage selector switch.

Pyle Home PTAU45 Mini 2x120 Watt Stereo Power Amplifier with USB/CD/AUX Inputs

Pyle Home PTAU45 Mini 2x120 Watt Stereo Power Amplifier with USB/CD/AUX Inputs Review

Pyle Home PTAU45 Mini 2x120 Watt Stereo Power Amplifier with USB/CD/AUX Inputs Feature

• 2x120W RMS at 4-ohm - Blue LED Output Level Display - Power ON LED Indicator
• USB Reader Function - 3.5mm Aux CD/MP3 Input Jack - 1/4'' Phone Jack - MIC Volume Control
• Master Volume Control - Balance Control - Bass and Treble Tone Controls - Switchable AUX1/AUX2/CD/USB Input - 1/4'' MIC Input Jack
• AUX1/AUX2/CD RCA Input - RCA REC Output - Four Push Type Speaker L/R Terminals
• 110/220 Voltage Selector - Dimensions:8.27''W x 2.72''H x 5.39''D

Pyle PTAU45 Home Amplifier is perfect for powering any stereo system. Complete with USB, CD and AUX inputs, and 2 x 120 watts of power -- this simple to use and durable amp has bass and treble controls, a slick blue LED output level display, L/R RCA inputs, and 4 speaker outputs. Using sophisticated circuitry and premium components for uncompromising musicality -- this product is famous for delivering powerful and accurate sound. This small but powerful amp delivers clear and crisp audio for it listener. Durable and affordable, this amp is made to last.

Technical Pro RX-B503 Stereo Receiver

Technical Pro RX-B503 Stereo Receiver Review

Technical Pro RX-B503 Stereo Receiver Feature

• Inputs - RCA (3 audio sources)
• Outputs - Banana binding post (to 4 speakers), RCA (to record line) RCA (PRE-AMP level output)
• AM/FM manual tuner
• iPod / MP3 input with cable
• Bass, treble and balance controls

If you've spent any time at all in professional audio, you know the name Technical Pro and what it stands for - incredible performance & sound, and the ultimate in reliability under harsh conditions. And now, Technical Pro offers the same technology in a series of integrated amps and receivers bringing more of what sets Technical Pro apart from all others. Digital fluorescent sound spectrum display Dual Karaoke / DJ microphone inputs Microphones controls - bass, treble, echo and volume 8 Different pre-set equalization modes Speaker Selector allows you to choose which speakers use Bass Booster Cooling speed fan prevents unit from getting too hot Remote control Removable rack-mount brackets Dimensions - 17w (19 w/ brackets) x 5.25h x 12.5d Weight - 15 lbs Power - 110-220V Switchable

Denon AVR-1312 5.1 Channel A/V Home Theater Receiver

Denon AVR-1312 5.1 Channel A/V Home Theater Receiver Review

Denon AVR-1312 5.1 Channel A/V Home Theater Receiver Feature

• Discrete Power Amps rated at 75 watts each
• HDMI Standby Pass Through
• HDMI 1.4a 4In/1Out 3D Ready
• 5.1ch A/V Surround Receiver

Enhancing the home theater experience, the Denon AVR-1312 5.1 Home Theater Receiver blends quality performance and convenient features. Offering the latest inputs, this powerful receiver features advanced processing that brings out the best in your Blu-ray/DVD players, game consoles, and other entertainment devices. The AVR-1312 supports high-resolution audio formats, including Dolby TrueHD and DTS-HD, for a dynamic surround-sound listening experience. It also supports HDMI 1.4a, allowing you to get the most out of 3D content. Enhanced by convenient digital inputs, including a dock connectivity option for iPod and iPhone, the AVR-1312 serves as a quality foundation for your home theater system.

Sherwood RX-4109 Stereo Receiver (Black)

Sherwood RX-4109 Stereo Receiver (Black) Review

Sherwood RX-4109 Stereo Receiver (Black) Feature

• Phono section preamp built-in
• Total Discrete Amplifier stage for all channels
• A/B switching for two pairs of speakers
• Five audio inputs including tuner
• Quartz digital tuning
• 17 3/8" W x 5" H x 13" D
• 5 audio inputs including tuner
• Switching for two pairs of speakers

Unlike the budget stereo receivers now flooding the entry-level price points at dealers across the country, the Sherwood RX-4109 is designed and built in-house with the same quality and attention to detail Sherwood has have been bringing to audio gear for the last 50 years. With 105 Watts RMS per channel, phono section, binding posts, a versatile remote control and switching for two pairs of loudspeakers, the only thing that bespeaks the word "budget" about the RX-4109 is its modest cost.

Onkyo TX-SR608 7.2-Channel Home Theater Receiver (Black)

Onkyo TX-SR608 7.2-Channel Home Theater Receiver (Black) Review

Onkyo TX-SR608 7.2-Channel Home Theater Receiver (Black) Feature

• 100 Watts per Channel at 8 Ohms, 20 Hz¿20 kHz, 0.08%, 2 Channels Driven, FTC
• THX Select2 Plus Certified
• HDMI (Version 1.4 to Support 3D and Audio Return Channel) with Deep Color, x.v.Color, LipSync, Dolby TrueHD, DTS-HD Master Audio
• HDMI Video Upscaling to 1080p with Faroudja DCDi Cinema
• Audio and 1080p Video Processing via HDMI (1 Front/ 5 Rear Inputs and 1 Output)

Sure, we call it an “entry-level” A/V receiver. But when you witness the full potential of the TX-SR608, you’ll know the level you’re entering is far beyond the ordinary. For a start, you get six of the latest HDMI 1.4a inputs for simple hook-up of all your high-def sources. HDMI 1.4a also brings compatibility with the new 3D video format, as well as an Audio Return Channel from your display back to the receiver. Complementing HDMI on the input front, you have an analog RGB video input for connecting your PC, and a Universal Port for Onkyo peripherals. All video sources, regardless of resolution, can be upscaled to big and beautiful 1080p via HDMI and Faroudja DCDi Cinema. Audio processing incorporates quality Burr-Brown DACs, lossless Dolby and DTS codecs, and the expanded surround formats of Audyssey DSX and Dolby Pro Logic IIz. Three-stage inverted Darlington circuitry and jitter-cleaning technology work to ensure extremely precise and faithful amplification. In recognition of the TX-SR608’s outstanding A/V prowess, it has been awarded THX Select2 Plus Certification.