Polk Audio PSW10 10-Inch Monitor Series Powered Subwoofer (Single, Black)

Polk Audio PSW10 10-Inch Monitor Series Powered Subwoofer (Single, Black) Review

Polk Audio PSW10 10-Inch Monitor Series Powered Subwoofer (Single, Black) Feature

• Single 10-inch subwoofer in black with built-in high-current amplifier for big bass
• Equipped with one 10-inch polymer-composite dynamic-balance cone driver
• Laser-based Klippel measurement technology for improved linearity and deep, precise sound
• Non-resonant all-MDF enclosure construction with 0.75-inch-thick baffles and internal bracing
• Measures 14 by 14.38 by 16.12 inches (WxHxD)

PSW10 fills in the bottom end of your home theater system. Relieve your main speakers from performing bass duty and let them work on the mids and highs. PSW10 is a great addition to any subwooferless system and will bring your movie watching experience to the next level. All woofers feature a floor coupled downward firing port. This configuration brings you maximum bass impact while keeping the front of the cabinet as low profile as possible.

Onkyo TX-NR809 THX Certified 7.2-Channel Network A/V Receiver (Black)

Onkyo TX-NR809 THX Certified 7.2-Channel Network A/V Receiver (Black) Review

Onkyo TX-NR809 THX Certified 7.2-Channel Network A/V Receiver (Black) Feature

• 135 W/Ch, 8 ohms, 20 Hz20 kHz, 0.08, 2 channels driven, FTC
• 8 HDMI Inputs and 2 Outputs with support for 3D and Audio Return Channel; Network Capability
• Direct Digital Connection of iPod/iPhone via Front & rear USB ports
• 135 W/Ch (8 ohms, 20 Hz?20 kHz, 0.08%, 2 channels driven, FTC) 145 W/Ch (8 ohms, 1 kHz, 0.7%, 2 channels driven, FTC)
• 8 HDMI Inputs and 2 Outputs with support for 3D and Audio Return Channel

With its advanced processing and fabulous array of connections, the TX-NR809 is ready to lift the roof off. Eight HDMI inputs handle all your high-def content, from master-quality audio to up scaled 4K video. Home network capability lets you bring streaming internet radio and PC audio to your living room. And the drop-down front panel conceals a plethora of one-touch audio controls and A/V inputs. Video -whether standard or high definition- gets the royal treatment from a high-quality HQV Vida processor and independent ISF calibration for each source. Advanced audio options include bi-amping, 7.2 multichannel pre-outs, and distributed multi-zone audio. As you'd expect from a receiver near the top of Onkyo's mid-range line-up, construction is first-rate. A massive transformer, symmetrical L/R channels, separate power and pre-amp blocks, and a highly rigid chassis provide the bedrock for a superlative audio performance. Built with the serious home theater fan in mind, the TX-NR809 offers a class-leading mix of power, features, and performance.

Pyle Home PT570AU 5.1-Channel 350 Watts AM/FM Radio with USB/SD Card and Amplifier Receiver

Pyle Home PT570AU 5.1-Channel 350 Watts AM/FM Radio with USB/SD Card and Amplifier Receiver Review

Pyle Home PT570AU 5.1-Channel 350 Watts AM/FM Radio with USB/SD Card and Amplifier Receiver Feature

• 5.1 Channel Amplifier - 12 Preset Radio Station - Output: 5 Channel Speaker Output Terminal for L, R, Center, SL, SR, And 1 line Out for Subwoofer
• Built-In AM/FM Radio - Full Remote Control
• Built-In USB and SD Audio - VFD Display
• 2 MIC Input, Treble and Bass of MIC Adjustable, Independent MIC Volume Control - Power Output: 300W for L,R Channel (4 Ohm) 50W for Center, Surround L and Surround R(4 Ohm)
• Over Current Protection, Short Circuit Protection And Over Voltage Protection - Input Selector: 3 Stereo RCA Selector, 1AM/FM Radio, 1 USB/SD, 2 Microphone Input

The PT570AU is a 5.1 channel home receiver with built-in AM/FM radio, two ¼" mic inputs, USB/SD card inputs for digital music playback, and 350 watts of output power. Store up to 12 presets. Adjust the mic volume control, treble, and bass. Inputs for 3 stereo RCA appliances. 2 channel speaker output. VFD display shows station frequency. Short circuit and over voltage protection keeps your equipment secure.

Audio Technica ATLP120 Professional Turntable

Audio Technica ATLP120 Professional Turntable Review

Audio Technica ATLP120 Professional Turntable Feature

• Selectable internal stereo phono preamplifier and USB connection to your Mac or Windows computer
• Direct-drive, high-torque motor; includes professional cartridge and headshell
• Selectable 33-1/3, 45, and 78 rpm speeds; +/-10 percent or +/-20 percent pitch adjust; high-accuracy quartz-controlled pitch lock
• S-shaped tone arm assembly with adjustable counterweight, antiskate adjustment, tone-arm height adjustment and lock
• Includes USB cable and Mac- and PC-compatible Audacity software

Audio-Technica's AT-LP120-USB direct-drive, high-torque professional turntable is perfect for DJs and other music enthusiasts, especially in an era that many would call "postvinyl," when it's no longer the norm for audio/video receivers or even integrated amplifiers to offer a dedicated phono input.

Connect the Audio Technica ATLP120 to your computer to digitize your old LPs (laptop not included; see larger image).

It also includes a selectable internal stereo phono preamplifier and a USB output that connects directly to your computer--perfect for digitizing your old LPs to high-quality MP3 or FLAC files for playback from your computer. USB cable and adapter cables are included, along with Mac- and PC-compatible Audacity software to digitize your LPs.

The AT-LP120's S-shaped tone arm assembly comes with an adjustable counterweight, an antiskate adjustment, a tone-arm height adjustment and lock, a tone-arm lift with hydraulic action and lift lever, and a tone-arm rest with a locking mechanism to keep the arm stable during transport.

The turntable uses a DC servo motor to maintain accurate rotational speed at either 33-1/3 45, or 78 rpm, governed by a selectable, high-accuracy quartz-controlled pitch lock--all of which gives new life to 7- and 12-inch singles you may not have played for years.

Unleash your inner DJ with the 'table's pitch-adjustment feature, with variations ranging from either +/-10 percent or +/-20 percent. A pop-up stylus target light and stroboscopic platter speed indicator offer visual assistance in queuing and playing your favorite tunes. Forward and reverse play options unlock countless creative doors.

The turntable comes with a cast-aluminum record platter, a slip mat, and a professional cartridge and headshell (model ATP-2) that plugs directly into the tone arm. Adjustable, antivibrational feet keep the platter level, regardless of your environs.

A start/stop button with remote start/stop input lets you integrate the player with your more sophisticated DJ tools. The player also includes a 45 rpm adapter with storage receptacle for the adapter and for a surplus or replacement headshell (sold separately).

What's in the Box

Turntable, removable hinged dust cover, slip mat, headshell/cartridge (ATP-2), AC power cord, 45 rpm adapter, USB cable; adapter cables, Audacity software (compatible with Mac and Windows), operating instructions.

Audio-Technica's AT-LP120-USB direct-drive, high-torque professional turntable is perfect for DJs and other music enthusiasts, especially in an era that many would call "postvinyl," when it's no longer the norm for audio/video receivers or even integrated amplifiers to offer a dedicated phono input. Connect the Audio Technica ATLP120 to your computer to digitize your old LPs (laptop not included). It also includes a selectable internal stereo phono preamplifier and a USB output that connects directly to your computer-perfect for digitizing your old LPs to high-quality MP3 or FLAC files for playback from your computer. USB cable and adapter cables are included, along with Mac- and PC-compatible Audacity software to digitize your LPs. The AT-LP120's S-shaped tone arm assembly comes with an adjustable counterweight, an antiskate adjustment, a tone-arm height adjustment and lock, a tone-arm lift with hydraulic action and lift lever, and a tone-arm rest with a locking mechanism to keep the arm stable during transport. The turntable uses a DC servo motor to maintain accurate rotational speed at either 33-1/3 45, or 78 rpm, governed by a selectable, high-accuracy quartz-controlled pitch lock-all of which gives new life to 7- and 12-inch singles you may not have played for years. Unleash your inner DJ with the 'table's pitch-adjustment feature, with variations ranging from either +/-10 percent or +/-20 percent. A pop-up stylus target light and stroboscopic platter speed indicator offer visual assistance in queuing and playing your favorite tunes. Forward and reverse play options unlock countless creative doors. The turntable comes with a cast-aluminum record platter, a slip mat, and a professional cartridge and headshell (model ATP-2) that plugs directly into the tone arm. Adjustable, antivibrational feet keep the platter level, regardless of your environs. A start/stop button with remote start/stop input lets you integrate the player with your more sophisticated DJ tools. The player also includes a 45 rpm adapter with storage receptacle for the adapter and for a surplus or replacement headshell (sold separately).

Onkyo TX-NR709 7.2-Channel Network A/V Receiver (Black)

Onkyo TX-NR709 7.2-Channel Network A/V Receiver (Black) Review

Onkyo TX-NR709 7.2-Channel Network A/V Receiver (Black) Feature

• 110 Watts per Channel at 8 Ohms, 20 Hz-20 kHz, 0.08%, 2 Channels Driven, FTC;
• HDMI Support for 3D, Audio Return Channel, Deep Color, x.v.Color, Lip Sync
• HDMI Video Upscaling to 4K with Qdeo Technology by Marvell
• Playback of Audio Files Through Local Network (MP3, WMA, WMA Lossless, FLAC, WAV, Ogg Vorbis, AAC, LPCM)
• THX Select2 Plus Certified

With its bountiful array of connections, the TX-NR709 A/V receiver handles just about any playback device you care to hook up. Eight HDMI inputs give you plenty of scope for high-definition sources, while two HDMI outputs double your display options. HDMI supports pristine lossless audio from Dolby and DTS and video upscaling to stunning 4K resolution via Qdeo technology. Connectivity is further enhanced by a front-panel USB port for digital link-up of iPod/iPhone, and a wide range of analog and digital inputs-including S-Video and 7.1 analog multichannel inputs-for all your legacy components. The network-capable TX-NR709 also brings PC audio and internet radio to your living room, where Audyssey MultEQ XT calibrates the soundfield to match the room's unique dimensions. Onkyo's graphical OSD and navigation GUI make it easy to browse your content and adjust settings on the fly. Finally, bi-amping capability, 7.2 multichannel pre-outs, and a dedicated phono input provide further flexibility for the demanding audiophile and help propel the TX-NR709 to the head of its class.

Pyramid PB717X 1,000-Watt 2-Channel Bridgeable Amplifier

Pyramid PB717X 1,000-Watt 2-Channel Bridgeable Amplifier Review

Pyramid PB717X 1,000-Watt 2-Channel Bridgeable Amplifier Feature

• 1000 Watts Total System Power Output
• MOSFET Pulse Width Modulated Power Supply
• Built-In Variable Low/High/Subwoofer Crossover
• High/Low Level Input
• 2 Ohm Stereo Stable

Pyramid prides itself on solid car audio without the huge price tag. The PB717X is no exception, featuring two MOSFET-powered channels of 50 watts RMS (75 watts at 2 ohms), bridgeable for subwoofers, and selectable high- and low-pass crossover modes for different applications.

Solid car audio without the huge price tag. Click to enlarge.

View output diagram.

View input diagram.

Bridgeable
Delivers two channels or bridge mono for subwoofers. The PB171X cranks out 2 x 50 watts RMS at 4 ohms and is 2-ohm stereo stable for 75 watts x 2.

Selectable Crossover Modes
The built-in crossover can be set to full for normal full-range systems, or low-pass/high-pass for delivering specific frequencies to components or subwoofers. Low-pass and high-pass frequency controls are provided for setting the crossover frequencies.

Input Versatility
The PB717X includes both high-level and low-level inputs, so you're covered with the various types of car stereos. The high-level inputs take direct speaker wire leads, while the low-level use RCA plugs.

To further match the amplifier to your receiver/head unit, a variable input level control is provided to dial in the perfect setting without distortion.

Bass Boost
Subwoofer fans rejoice: The PB717X features a bass boost of up to 18 dB, for added rumble.

MOSFET Power
The MOSFET pulse width modulated power supply helps provide excellent sound quality, minimal distortion, and efficient power handling.

Comprehensive Protection
High-performance audio requires a lot of power, and things can get hot quickly. Like any solid car amplifier, the PB717X features protective circuits. Overload and thermal indicators let you know they've activated and shut off the amp. In the event of a short circuit, power protection is provided in the form of easily replaceable fuses.

PB717X Specs

RMS power @ 4 ohms:	50 watts x 2
RMS power @ 2 ohms:	75 watts x 2
Maximum power output:	500 watts x 2
Input impedance/sensitivity (low-level):	10k ohms / 200 mV
Input impedance/sensitivity (high-level):	100 ohms / 5V
Signal/Noise ratio:	90 dB
THD:	Less than 0.04%
Frequency response:	15-30 kHz
Dimensions:	9.84 x 10.03 x 1.96 inches (L x W x H)
Power supply voltage:	14.4V DC negative ground
Maximum current draw:	30A

What's in the Box

Pyramid PB717X power amplifier and user's manual.

Pyramid prides itself on solid car audio without the huge price tag. The PB717X is no exception, featuring two MOSFET-powered channels of 50 watts RMS (75 watts at 2 ohms), bridgeable for subwoofers, and selectable high- and low-pass crossover modes for different applications.

Yamaha HTR-6230BL 500 Watt 5-Channel Home Theater Receiver

Yamaha HTR-6230BL 500 Watt 5-Channel Home Theater Receiver Review

Yamaha HTR-6230BL 500 Watt 5-Channel Home Theater Receiver Feature

• 5-channel 500W powerful surround sound (100W x 5)
• 1080p-Compatible HDMI 1.3
• Bluetooth music streaming using Yamaha YBA-10 Bluetooth Audio Receiver
• Connect an iPod using Yamaha YDS-10SL Universal iPod Dock

Yamaha HTR-6230BL 500 Watt 5-Channel Home Theater Receiver

Pyle Home PD1000A AM/FM Receiver

Pyle Home PD1000A AM/FM Receiver Review

Pyle Home PD1000A AM/FM Receiver Feature

• Power four loudspeakers with AUX Input (iPod/MP3 w/ Cable)
• Separate gain control for each source: DVD, Tuner, USB, MP3
• Compatible with DVDs, CDs, VCDs, and user-recordable discs
• Digital colorful fluorescent display with visual power level DB display
• 50-station AM/FM memory presets with Auto Station Seek/Store

This Pyle Pro 1000-Watt receiver has a built in DVD player, USB drive, and auxiliary RCA input. In other words, it can handle almost anything you throw at it--your favorite movies, the video clips you store on your USB drive, or your favorite music on your iPod. Each input has its own gain control. The digital colorful fluorescent display shows relevant track and disc information in addition to proving a power level dB display. This unit is also equipped with an AM/FM tuner with up to 60 presets. The PD1000A powers up to 4 speakers, and has RGB, RCA, and S-video outputs as well as a subwoofer line output. It runs on selectable 110V or 220V for easier system integration.

TIC CORPORATION AMP10 Exterior Receiver Amplifier (Black Finish)

TIC CORPORATION AMP10 Exterior Receiver Amplifier (Black Finish) Review

TIC CORPORATION AMP10 Exterior Receiver Amplifier (Black Finish) Feature

• Weatherproof Design
• 12V Power Supply
• Cd, Mp3 and Ipod(R) Inputs
• Imp: 4-8 Ohm
• Output: 4X Speakers

Exterior Receiver Amplifier- Black Finish

Premium 25 Foot High Speed HDMI Cable for your Sony HD Home Theater Receiver and Amplifier ! Supports: 1080p-2160p, 4K, 3D, Deep Color, TrueHD, CL3, and 800Hz technologies.

Premium 25 Foot High Speed HDMI Cable for your Sony HD Home Theater Receiver and Amplifier ! Supports: 1080p-2160p, 4K, 3D, Deep Color, TrueHD, CL3, and 800Hz technologies. Review

Premium 25 Foot High Speed HDMI Cable for your Sony HD Home Theater Receiver and Amplifier ! Supports: 1080p-2160p, 4K, 3D, Deep Color, TrueHD, CL3, and 800Hz technologies. Feature

• Experience digital high definition of your video in one cable
• Enjoy movies and games at up to 2160p resolution
• Superior audio via the Dolby Digital 7.1 Surround Sound output
• Tripple shielded, lossless cable audio and video cable quality.
• Supports Video 1.4 Resolutions: 1080-2160p.

Premium 25 Foot High Speed HDMI Cable for your Sony HD Home Theater Receiver and Amplifier ! Supports: 1080p-2160p, 4K, 3D, Deep Color, TrueHD, CL3, and 800Hz technologies.

Pyle - Mini 2x75W Stereo Power Amplifier - PCA3

Pyle - Mini 2x75W Stereo Power Amplifier - PCA3 Review

Pyle - Mini 2x75W Stereo Power Amplifier - PCA3 Feature

• 2x75W MAX Power
• BLUE LED output level display
• POWER ON/OFF switch and LED indicator
• MP3 Via 3.5mm To RCA Converter
• RCA jack input

The PCA3 mini stereo power amplifier from Pyle provides up to 75W of power on each channel at 4 Ohms. Connect your inputs using the RCA jacks, and output an amplified audio signal over standard speaker push jacks. It’s compatible with any audio or computer device--you can even hook up an iPod using a 3.5mm to RCA jack converter. A master volume control on the front lets you adjust the gain, and treble, bass, and volume controls on the front let you tweak your sound to exactly how you want it. The PCA3 runs on 110V or 220V with a voltage selector switch.

Pyle Home PCA4 Mini 2x120 Watt Stereo Power Amplifier

Pyle Home PCA4 Mini 2x120 Watt Stereo Power Amplifier Review

Pyle PCA4 Home Amplifier is perfect for powering any stereo system. Complete with 2 x 120 watts of power -- this simple to use and durable amp has bass and treble controls, a slick blue LED output level display, L/R RCA inputs, and 4 speaker outputs. Using sophisticated circuitry and premium components for uncompromising musicality -- this product is famous for delivering powerful and accurate sound. This small but powerful amp delivers clear and crisp audio for it listener. Durable and affordable, this amp is made to last.

OSD Audio AMP200 2-Channel Dual-Source 250-Watt High Definition Power Amplifier (Black)

OSD Audio AMP200 2-Channel Dual-Source 250-Watt High Definition Power Amplifier (Black) Review

OSD Audio AMP200 2-Channel Dual-Source 250-Watt High Definition Power Amplifier (Black) Feature

• 80W per channel into 8 ohms, 125W per channel into 4 ohms, 200W per channel into 2 ohms, 250W Bridged Mono into 8 ohms
• Frequency Response: (20Hz to 20kHz)+0.0dB, -0.5dB
• Signal to Noise ratio: -103dB ref. to rated power into 4 ohms
• Dual Voltage 110/220V
• Dimension: 16 1/2" W x 4 1/4" H x 14" D

Rated at 80 Watts per channel at 8 ohms, the OSD-AMP200 is a popular models among professional installers and our DIY customers. This high current (2 Ohm stable) amplifier is overload stable so it’s ideal for use anywhere clean power is needed. Step-up features rarely seen in amps of this price range include a built-in voltage meter, front mounted volume and balance trim controls, and automatic source switching with adjustable delay timer.

RCA ANT1450BM Refurbished Multi-Directional Digital Flat Amplified HDTV Antenna (Black)

RCA ANT1450BM Refurbished Multi-Directional Digital Flat Amplified HDTV Antenna (Black) Review

RCA ANT1450BM Refurbished Multi-Directional Digital Flat Amplified HDTV Antenna (Black) Feature

• RCA digital flat amplified home theater antenna is multi-directional and receives free uncompressed digital signals
• More free channels and easy-to-use effective parental controls
• Antenna receives local HDTV and DTV as well as analog UHF and VHF and preserves signal purity with ELN Extremely Low Noise circuitry
• This patented design enhances reception by amplifying weak signals and outperforms traditional antennas
• Sleek black design will lay flat or stand up for convenient placement and comes with 1 year limited warranty and removable amplifier
• Includes enhanced services such as ditigal closed-captioning
• No need for constant adjustments since signals are received from 360 degrees

RCA digital flat amplified home theater antenna is multi-directional and receives free uncompressed digital signals. Broadcast digital TV gives you more free channels, easy to use effective parental controls and enhanced services such as ditigal closed-captioning. To preview digital TV go to www.StayTuned2TV.com. Antenna receives local HDTV and DTV as well as analog UHF and VHF and preserves signal purity with ELN (Extremely Low Noise) circuitry. The patented design enhances reception by amplifying weak signals and outperforms traditional antennas with no need for constant adjustments since signals are received from 360 degrees. The sleek black design can be hung or laid flat and disappears into its surroundings. Comes with 1 year limited warranty and removable amplifier.

Onkyo SKS-HT540 7.1 Channel Home Theater Speaker System

Onkyo SKS-HT540 7.1 Channel Home Theater Speaker System Review

Onkyo SKS-HT540 7.1 Channel Home Theater Speaker System Feature

• 7.1-channel home theater speaker set
• 130 watts total output on 2-way bass reflex front, center, and surround speakers
• Front and center 2-way speakers feature 5-inch diaphragm woofers and 1-inch balanced floating tweeter
• Bass reflex powered subwoofer with 230 watts output
• Subwoofer construction includes a 10-inch cone driver

The 7.1-channel Onkyo SKS-HT540 speaker package is the perfect addition to your DVD player and home theater receiver. It features 2-way bass reflex front, center and surround speakers that provide an excellent soundstage with 130 watts of output each, plus an earth-shaking 230W powered subwoofer for rumbling impact.

Each of the front and center speakers feature dual 5-inch woofers with the original OMF (Onkyo Micro Fiber) diaphragm technology, plus they use pure cotton cones for an extremely fast and accurate response. The powered subwoofer offers an earth-shaking 10-inch cone. Each of the eight speakers has a two wires that connect to the receiver at one end and the speaker at the other.

Onkyo SKS-HT540 7.1-channel surround sound speaker package.

Specifications

Front Speakers Type: 2-Way, Bass Reflex Woofer: 5-inch OMF Diaphragm x 2 Tweeter: 1-inch Balanced-Dome, Floating Frequency response: 55 Hz-50 kHz Sensitivity: 86 dB/W/m Maximum power: 130 watts Dimensions: 6-3/16 x 17-1/16 x 7-7/8 inches Surround Speakers Type: 2-Way, Bass Reflex Woofer: 3-1/8-inch Cone Tweeter: 3/4-inch Balanced-Dome Frequency response: 60 Hz-20 kHz Sensitivity: 82 dB/W/m Maximum power: 130 watts Dimensions: 6-7/8 x 10-7/16 x 4 inches

Center Speaker Type: 2-Way, Bass Reflex Woofer: 5-inch OMF Diaphragm x 2 Tweeter: 1-inch Balanced-Dome, Floating Frequency response: 55 Hz-50 kHz Sensitivity: 86 dB/W/m Maximum power: 130 watts Dimensions: 17-1/16 x 6-3/16 x 7-7/8 inches Subwoofer Type: Bass Reflex Powered Woofer: 10-inch cone Frequency response: 25 Hz-150 kHz Maximum power: 230 watts Dimensions: 10-13/16 x 18-5/8 x 17-11/16 inches

The 7.1-channel Onkyo SKS-HT540 speaker package is the perfect addition to your DVD player and home theater receiver. It features 2-way bass reflex front, center and surround speakers that provide an excellent soundstage with 130 watts of output each, plus an earth-shaking 230W powered subwoofer for rumbling impact. Each of the front and center speakers feature dual 5-inch woofers with the original OMF (Onkyo Micro Fiber) diaphragm technology, plus they use pure cotton cones for an extremely fast and accurate response. The powered subwoofer offers an earth-shaking 10-inch cone. Each of the eight speakers has a two wires that connect to the receiver at one end and the speaker at the other.